IPB     IPB     IPB

Welcome Guest ( Log In | Register )
Azsolo.com · Results · Registration

Tire Rack

 
Reply to this topicStart new topic
> 17x7 4x100 RPF1 et43mm $750
APEXLVR
post May 18 2016, 12:18 PM
Post #1





Group: Autocrosser
Posts: 482
Joined: 25-July 08
From: Tempe
Member No.: 1346



Can't believe it took me that long to get the old tires dismounted and take pics... Anyway:

Bought these wheels for the Miata, but they don't fit over the upgraded brakes. This set, new, is $1050.24 shipped to Tempe from tirerack.com. They are under 15lbs per corner. They are in excellent condition with the exception of some scratching on the back of two of the wheel's spokes that occurred during test fitting with the big brakes (pictured)

17in diameter
7in wide
et43mm
4x100m bolt pattern

Wheels currently have hub centering rings installed to fit a 2016 Miata.

No centercaps or lugnuts included.

I frequently travel between Tempe/Tucson/Sierra Vista areas and could probably at least get them as far as those cities if you can meet up anywhere along the way.

Feel free to share this CL link for anyone not on the forums.

http://phoenix.craigslist.org/evl/pts/5592703520.html

Thanks!

Attached Image


Attached Image


Attached Image


Attached Image



Attached Image


Attached Image




--------------------
Travis Kelley


2012 Specialized Crux Comp Apex: .917hp / 48.16 ft-lbs at 100RPM


Go to the top of the page
 
+Quote Post
Ben Clement
post May 18 2016, 01:10 PM
Post #2


Administrator


Group: Admin
Posts: 3513
Joined: 5-December 02
From: Tucson
Member No.: 1



Can't make these fit with a small spacer?

If anyone buys these and needs lug nuts, I've got you covered!
Go to the top of the page
 
+Quote Post
APEXLVR
post May 18 2016, 01:13 PM
Post #3





Group: Autocrosser
Posts: 482
Joined: 25-July 08
From: Tempe
Member No.: 1346



QUOTE (Ben Clement @ May 18 2016, 02:10 PM) *
Can't make these fit with a small spacer?

If anyone buys these and needs lug nuts, I've got you covered!


Can't make them fit with a CS LEGAL spacer. would likely need 7mm spacer to make it work, I can only use a 5mm and stay legal and that JUST BARELY doesn't fit.


--------------------
Travis Kelley


2012 Specialized Crux Comp Apex: .917hp / 48.16 ft-lbs at 100RPM


Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 17th September 2019 - 06:24 PM